Are you looking to optimize how your office is used? Or maybe you want to reduce your office size after going hybrid? We’ve collected 13 office space utilization metrics that you need to know.

You want your office to support your employees, and to do that, you need to improve the way your office is being used. But before you make any actual changes, you need to figure out how your office is being used in the first place, and that’s where office space utilization analysis comes in.

The question is, what should you measure and how?

In this article, we’ll give you a rundown of 13 office space utilization metrics that will help you understand how your office is being used, and we’ll tell you how and when you should measure them.

If you’re new to office space utilization, or if you’re trying to figure out how office space utilization has changed with the hybrid workplace, you should look at this article about office space utilization and the hybrid workplace.

**What you gain from measuring this metric: **

*Measuring capacity will let you know how many people can use your office at the same time. Measuring occupancy will let you know how your office is being utilized at specific times.*

Measuring capacity and occupancy let you know if you are fully utilizing your office space. If you’re looking to find out whether you should increase or decrease square meters, this is where you start.

While they are actually two metrics, capacity and occupancy are often named as one, simply because you need to measure both if you want to understand one.

Capacity refers to how many people a building or a floor can contain based on the architect’s recommendation for the maximum capacity of the building. Occupancy refers to how many people are using the specified building or floor at any given point in time.

Measuring capacity will give you a sense of how many people can potentially use your premises at any one time. This is a useful metric when looking at the total office space utilization. Measuring occupancy will give you a set of occupancy trends, which will let you know how your office is being utilized at specific times.

**What you gain from measuring this metric: **

*Total workplace utilization lets you figure out if your office is too big, too small or just right.*

Total workplace utilization is the percentage of your workplace which is occupied. This can be measured both as a snapshot or as an average calculated over time.

There’s an opportunity to gain different pieces of information from continuously calculating total workplace utilization. This includes development in trends over time, peak usage, underutilization, and workstation occupancy.

**What you gain from measuring this metric: **

*Measuring space-specific utilization lets you know if you need more of a certain thing (more meeting rooms, more desks, more parking spaces etc.)*

While total workplace utilization concerns itself with the entire workplace, space specific utilization concerns itself with certain areas or types of areas in the workplace.

Measuring space-specific utilization lets you compare the utilization of different areas and lets you know if you need to increase the number of a certain room or workstation type.

Understanding both total workplace utilization and space-specific utilization will help you support greater efficiency and productivity for employees.

**What you gain from measuring this metric: **

*Calculating the mobility ratio lets you know if your office can function if 100% of your staff shows up at the same time.*

The mobility ratio is another metric that requires you to compare the number of employees to the number of seats. To account for workforce mobility, you need to factor in how many of your employees and how often, how many part-time and full-time employees you have, and how many visitors utilize your offices each day.

If your office consists of 50 workstations which are occupied by 35 people regularly, you have a utilization of 70%, but if you have adopted a hybrid work style with a 50/50 split between remote and in-office work, there’s a good chance that you in fact have 70 people who could occupy a seat.

The purpose of mobility ratios is to figure out if your office can function when 100% of your staff shows up at the same time. But more importantly, you need to figure out if you want it to.

Calculating the mobility ratio is rather simple, as you are mainly looking for the number of seats per employee. The number of seats gives you an idea of how mobile each employee can be in terms of where they are working from.

**What you gain from measuring this metric: **

*Calculating cost per head lets you know how much you are spending on maintaining your office.*

The biggest reason to measure and analyze utilization isn’t to balance the number of employees with the amount and types of workstations. From a business perspective, it’s mainly about controlling costs.

Depending on when you are calculating cost per head/seat, measuring this metric either allows you to optimize your office and layout design within a given budget or create an overview of how much you are spending to accommodate each employee.

When it comes to office space utilization, cost per head is measured by calculating the average annual cost to lease, decorate and furnish an office space and dividing it by the number of employees using that office space.

For hybrid workplaces, you can choose to calculate the cost per seat instead of the cost per head, as this lets you measure the cost related to the office space without tainting your figures with costs related to equipping home offices. This is especially important if the two things are funded by different budgets.

**What you gain from measuring this metric: **

*Measuring density will tell you if you need to increase your office size, or a certain type of space in your office (ie. do you need more meeting rooms).*

In essence, density is the number of people per square foot. As a metric density is more granular than most other office space utilization metrics. But it is still useful in looking at the office in segments (departments, buildings, floors etc.)

Data related to density can be used to show when a team, department or even your entire organization has outgrown its current space.

You measure density by comparing the needs of a certain segment (like a team or a department) with the number of square feet (or seats) of a certain type which matches the needs.

For instance, if you have a department of 50 people, who has access to two meeting rooms with a total capacity of 30 seats, and where 35 members of the department may need to be seated in a meeting room at any given point in time, you are looking at a density which is higher than the total capacity.

Looking at density in a segment as we have done in this example, tells us not only that there’s a need for space, but also which type of space is needed, and more specifically who needs it.

**What you gain from measuring this metric: **

*Keeping an eye on your immediate occupancy rate lets you know how much buffer time you need to add to room bookings in your scheduling software.*

The immediate occupancy rate is how quickly a given room or workstation can be occupied after it has been cleaned.

An organization may have policies to air out a room after use, and during covid, it wasn’t uncommon for offices that were still open to have a policy of leaving rooms “locked” for a certain amount of time after being used.

Immediate occupancy rate isn’t measured as such, as it is usually a number of minutes specified by the organization. During covid, this number was commonly increased to reduce the spread of disease.

**What you gain from measuring this metric: **

*Measuring your room turnover rate lets you know if you need to increase or decrease your immediate occupancy rate.*

Room turnover rate is the rate at which a room becomes ready for use after it has been occupied.

For meeting rooms, this may be the time it takes before it is cleaned, or any catering is removed from the room by service staff. During the height of covid 19, the same concept was applied to workstations, where it was calculated as how long it took for a workstation to be vacated until it was cleaned and ready for use by another person.

To find your room turnover rate, you simply measure how long it takes from the point a room becomes vacant until it is ready to be booked again.

Note that in many cases, your turnover rate could be instant, rather than an actual figure if, for instance, you have meeting rooms which are “self-cleaned” or unable to receive catering (and as such requires less cleaning). The room turnover rate may differ depending on room type.

**What you gain from measuring this metric: **

*Calculating capacity vs. occupancy rates lets you optimize meeting room sizes or the number of workstations on a given floor.*

While capacity and occupancy are two different metrics, you can learn a lot from comparing the two. Most importantly, measuring capacity vs. occupancy rates lets you determine how much a given area is actually being used.

Capacity vs occupancy rates is usually calculated simply by dividing the occupancy of a given area by the capacity of that same area.

For instance, if you are calculating the capacity vs occupancy rate for an office with 150 workstations (capacity) where 107 are occupied on average (occupancy) that area would have a capacity vs occupancy rate of 0,71.

**What you gain from measuring this metric: **

*Measuring room usage helps let you know if you need to increase or decrease the amount of a certain room type based on how it is being used in your organization.*

The metrics that make up room usage are split between the number of hours a given room is in use, how many hours it is available, and what the downtime is for that room.

Measuring room usage is usually done by consulting insights or analytics modules of your chosen room booking software. The resulting data can then be used to turn each figure into a percentage for easy comparison. Things like occupancy sensors can be used to further increase the quality of that data.

**What you gain from measuring this metric: **

*Measuring open space performance lets you know if you need to change the purpose of areas like collaboration spaces, lounge areas, number of lunch seats etc.*

When you are looking at the performance for open space environments such as lounge areas or open collaboration spaces, you will most often need to include metrics such as density, sensitivity to noise, and privacy levels.

The best way to measure open space performance is to gather the relevant metrics for all open spaces and calculate an average. After that, you can compare your average with the extremes in your data set or with a predefined target.

**What you gain from measuring this metric: **

*Calculating overcapacity lets you know how much you can reduce your total office size after going hybrid.*

The textbook definition of overcapacity is “how much capacity exceeds occupancy”. Which is just a fancy way of saying how much of your space is going unused.

Overcapacity is usually measured as development over hours or days.

This is because certain times of day (early morning, lunch, and late afternoon, for instance) will have a much higher overcapacity than other times.

Operating with a high overcapacity is quite common in hybrid workplaces, as employees who decide to work from home instead of going to the office will leave empty workstations.

Overcapacity is one of the best metrics to look at when trying to figure out how much you can reduce your office size after going hybrid.

Overcapacity is calculated as a percentage. For instance, if your office has 100 workstations but only 75 workstations are occupied, you have an overcapacity of 25%.

This may change throughout the day as some employees leave or take breaks and visitors show up. Because of this, overcapacity should be looked at as a development over time and not as a single percentage.

**What you gain from measuring this metric: **

*Calculating the desk ratio can help you if you want to reduce your office size after going hybrid.*

Desk ratio, also known as workstations per employee, is the average number of workstations supplied for each employee.

The number usually includes both cubicles, desks, tables, and other areas where employees can carry out work. Meeting room seats can be included in the calculation but usually aren’t.

The thing you need to be aware of when it comes to desk ratio is that the minimum desk ratio and optimal desk ratio rarely match each other. This is especially important for hybrid workplaces looking to reduce their office size.

Hybrid workplaces can use desk-ratio calculations to optimize their office size for maximum space efficiency.

Calculating the desk ratio in a 100% in-office workplace is pretty simple. You just divide the number of workstations with the number of employees, and that’s your desk ratio.

For instance, if you have 120 workstations in your office and 96 employees, you have a desk ratio of 1,25. Meaning you have 1,25 workstations per employee.

However, this figure isn’t as useful when you have remote or hybrid workplaces and want to reduce your office size, mainly because you may end up with a desk ratio below 1, which would suggest you should add more desks, even if those desks aren’t used.

For hybrid workplaces looking to reduce their office size, it works better to reverse engineer the calculation, so instead of calculating how many workstations you have per employee, you calculate how many workstations you need.

To do this, you need to know how many days your employees are in the office on average. If you operate with an “allowed” number of remote days per week, you can use those numbers, or if you use a desk booking app or workplace management tool, you can glean the data from that.

When you have the data, you need to multiply the average number of days employees spend in the office with the number of employees divided by the length of your workweek.

This will give you the minimum number of workstations needed, however, for most workplaces you need around 30% more workstations than the calculation shows.

If you are just starting to measure your office space utilization you should keep in mind, that one or more of these metrics may not apply to your particular organization.

A good place to begin is to focus on the primary objective of office space utilization – to optimize the relationship between capacity and occupancy ratios.